snmp context
Use this command to associate the SNMP context with the VRF.
Use the no form of this command to remove the SNMP context association from VRF.
Command Syntax
snmp context-name WORD
no snmp context-name
Parameters
WORD
SNMP context name (Maximum 32 alphanumeric characters)
Default
No default value is specified.
Command Mode
Configure VRF mode
Applicability
This command was introduced before OcNOS version 6.1.0.
Examples
OcNOS#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
OcNOS(config)#ip vrf red
OcNOS(config-vrf)#snmp context-name context1
Last modified date: 10/19/2023