snmp-server contact
Use this command to set the system contact information for the device (sysContact object).
Use the no form of this command to remove the system contact information.
Command Syntax
snmp-server contact (vrf management|) (TEXT|)
no snmp-server contact (vrf management|) (TEXT|)
Parameters
management
Virtual Routing and Forwarding name
TEXT
System contact information; maximum length 1024 characters without spaces
Default
No default value specified.
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#snmp-server contact vrf management Irving@555-0150
Last modified date: 10/19/2023