snmp-server enable snmp
Use this command to start the SNMP agent daemon over UDP.
Use the no form of this command to stop the SNMP agent daemon over UDP.
Command Syntax
snmp-server enable snmp (vrf management|)
no snmp-server enable snmp (vrf management|)
Parameters
management
Virtual Routing and Forwarding name
Default
No default value specified.
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#snmp-server enable snmp vrf management
Last modified date: 10/19/2023