xcvr loopback

OcNOS-SP : System Management Guide : System Management Command Reference : Smart SFP Commands : xcvr loopback

xcvr loopback

Use this command to loopback Tx and Rx Input loop back for remote.

Use this command to loopback Tx and Rx Output loop back for remote.

Command Syntax

xcvr loopback (in|out) remote

no xcvr loopback (in|out) remote

Parameters

None

Default

None

Command Mode

Interface mode

Applicability

This command was introduced in OcNOS version 6.2.0.

Example

The following command displays detailed information of xcvr loopback.

	     OcNOS(config)#int xe2

     OcNOS(config-if)#xcvr loopback in remote

     OcNOS(config-if)#commit

     OcNOS(config-if)#end

     OcNOS#conf t

     OcNOS(config)#int xe2

     OcNOS(config-if)#xcvr loopback out remote

     OcNOS(config-if)#commit

     OcNOS(config-if)#end

Last modified date: 10/19/2023