OcNOS-SP : System Management Guide : System Management Command Reference : Telnet : debug telnet server
debug telnet server
Use this command to display telnet debugging information.
Use the no form of this command to stop displaying telnet debugging information.
Command Syntax
debug telnet server
no debug telnet server
Parameters
None
Default
By default, disabled.
Command Mode
Executive mode and configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
 
#show debug telnet-server
 
telnet server debugging is on
#
 
Last modified date: 10/19/2023