feature telnet
Use this command to enable the telnet server.
Use the no form of this command to disable the telnet server.
Note: Executing no form command closes the active telnet session.
Command Syntax
feature telnet (vrf management|)
no feature telnet (vrf management|)
Parameters
management
Virtual Routing and Forwarding name
Default
By default, feature telnet is disabled.
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#feature telnet vrf management
Last modified date: 10/19/2023