telnet
Use this command to open a telnet session to an ipv4 address or host name resolved to ipv4 address.
Command Syntax
telnet (A.B.C.D | HOSTNAME) (vrf (NAME|management))
telnet (A.B.C.D | HOSTNAME) (<1-65535>) (vrf (NAME|management))
Parameters
A.B.C.D
Destination IPv4 Address to open a telnet session.
HOSTNAME
Destination Hostname to resolve into IPv4 address to open a telnet session.
1-65535
Destination Port to open a telnet session. Default is 23.
vrf
Specify the VPN routing/forwarding instance.
NAME
Specify the name if the VPN routing/forwarding instance.
management
Management VPN routing/forwarding instance name.
Default
By default, telnet is 23
Command Mode
Privileged Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#telnet 10.12.16.17 2543 vrf management
Trying 10.12.16.17...
Last modified date: 10/19/2023