telnet6
Use this command to open a telnet session to an ipv6 address or host name resolved to ipv6 address.
Command Syntax
telnet6 (X:X::X:X| HOSTNAME) (vrf (NAME|management))
telnet6 (X:X::X:X | HOSTNAME) (<1-65535>) (vrf (NAME|management))
Parameters
X:X::X:X
Destination IPv6 Address to open a telnet session.
HOSTNAME
Destination Host name to resolve into IPv6 address to open a telnet session.
1-65535
Destination Port to open a telnet session. Default is 23.
vrf
Specify the VPN routing/forwarding instance.
NAME
Specify the name if the VPN routing/forwarding instance.
management
Management VPN routing/forwarding instance name.
Default
By default, telnet is 23.
Command Mode
Privileged Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#telnet6 2:2::2:2 2543 vrf management
Trying 2:2::2:2...
Last modified date: 10/19/2023