Un-configure Port Breakout
Combine the breakout port back to original port as (ce3).
Configuration
OcNOS#configure terminal | Enter configure mode. |
OcNOS(config)#no port ce3 breakout | Combine the breakout port back to original port as (ce3). |
OcNOS(config)#commit | Commit the configuration. |
Validation
OcNOS#sh run int ce3
!
interface ce3
!
OcNOS#sh run int ce3/1
% Can't find interface ce3/1.
OcNOS#sh run int ce3/2
% Can't find interface ce3/2.
OcNOS#sh run int ce3/3
% Can't find interface ce3/3.
OcNOS#sh run int ce3/4
% Can't find interface ce3/4.
OcNOS#sh int br
Codes: ETH - Ethernet, LB - Loopback, AGG - Aggregate, MLAG - MLAG Aggregate
FR - Frame Relay, TUN -Tunnel, PBB - PBB Logical Port, VP - Virtual Port
CVP - Channelised Virtual Port, METH - Management Ethernet, UNK- Unknown
ED - ErrDisabled, PD - Protocol Down, AD - Admin Down, IA - InActive
PD(Min L/B) - Protocol Down Min-Links/Bandwidth
DV - DDM Violation, NA - Not Applicable
NOM - No operational members, PVID - Port Vlan-id
Ctl - Control Port (Br-Breakout/Bu-Bundle)
HD - ESI Hold Timer Down
--------------------------------------------------------------------------------
Ethernet Type PVID Mode Status Reason Speed Port Ctl Br/Bu Loopbk
Interface Ch #
--------------------------------------------------------------------------------
ce0 ETH -- routed up none 100g -- No No
ce1 ETH -- routed up none 40g -- No No
ce2 ETH -- routed up none 100g -- No No
ce3 ETH -- routed down PD 100g -- No No
ce4 ETH -- routed down PD 100g -- No No
ce5 ETH -- routed down PD 100g -- No No
ce6 ETH -- routed down PD 100g -- No No
ce7 ETH -- routed down PD 100g -- No No
ce8 ETH -- routed down PD 100g -- No No
ce9 ETH -- routed down PD 100g -- No No
ce10 ETH -- routed down PD 100g -- No No
ce11 ETH -- routed down PD 100g -- No No
ce12 ETH -- routed down PD 100g -- No No
ce13 ETH -- routed down PD 100g -- No No
ce14 ETH -- routed up none 40g -- No No
ce15 ETH -- routed up none 40g -- No No
Last modified date: 10/19/2023