evpn
Use this command to configure default gateway behavior on a VTEP for particular VNID.
Use the no form this command to disable default gateway behavior on a VTEP for the particular VNID.
Note: Map an IRB interface to an L2 VNID. This IRB interface can have multiple IP address as configured in IRB IP address CLI and can serve all subnets attached to the L2 VNID.
Command Syntax
evpn <NAME>
no evpn <NAME>
Parameters
NAME
IRB interface name
Command Mode
NVO Mode
Applicability
This command was introduced before OcNOS version 4.1.
Example
#config mode
(config)# nvo vxlan id 2000 ingress-replication inner-vid-disabled
(config-nvo)# evpn irb1
(config-nvo)# no evpn irb1
Last modified date: 10/20/2023