Data Center Bridge Commands
This section lists and describes the commands that can be used in a Data Center Bridging (DCB) environment.
The DCB includes the following command:
show data-center-bridging
Use this command to display information about show data-center-bridging.
Command Syntax
show data-center-bridging admin-details
show data-center-bridging operational-details
show data-center-bridging remote-details
Parameters
admin-details
administrative details
operational-details
operational details
remote-details
remote details
Command Mode
Exec mode and Privileged Exec mode
Applicability
This command was introduced before OcNOS version 6.5.1.
Examples
#show data-center-bridging admin-details interface xe4/3
PFC administrative details
interface : xe4/3
State advertise willing cap syncd priorities
================================================================================
On On On 4 On 3 4
#show data-center-bridging operational-details interface xe4/3
PFC Operational details
interface : xe4/3
state cap syncd priorities
================================================================================
On 4 On 0 1 2
#show data-center-bridging remote-details interface xe4/3
PFC Remote details
interface : xe4/3
State Willing Cap Priorities
================================================================================
On On 4 0 1 2