Data Center Bridge Commands
This section lists and describes the commands that can be used in a Data Center Bridging (DCB) environment.
The DCB includes the following command:
data-center-bridging
Use this command to enable the Data Center Bridging
Use the no form of this command to disable the Data Center Bridging
Command Syntax
data-center-bridging enable
data-center-bridging disable
Parameters
None
Default
Disabled
Command Mode
Configuration mode
Applicability
This command was introduced before OcNOS version 1.3. This command is applicable for earlier releases prior to OcNOS version 6.6.1 for backward compatibility.
Examples
OcNOS(config)#data-center-bridging enable bridge 1
OcNOS(config)#commit
OcNOS(config)#
OcNOS(config)#data-center-bridging disable bridge 1
OcNOS(config)#commit
OcNOS(config)#
show data-center-bridging
Use this command to display information about show data-center-bridging.
Command Syntax
show data-center-bridging admin-details
show data-center-bridging operational-details
show data-center-bridging remote-details
Parameters
admin-details
administrative details
operational-details
operational details
remote-details
remote details
Command Mode
Exec mode and Privileged Exec mode
Applicability
This command was introduced before OcNOS version 6.5.1.
Examples
#show data-center-bridging admin-details interface xe4/3
PFC administrative details
interface : xe4/3
State advertise willing cap syncd priorities
================================================================================
On On On 4 On 3 4
#show data-center-bridging operational-details interface xe4/3
PFC Operational details
interface : xe4/3
state cap syncd priorities
================================================================================
On 4 On 0 1 2
#show data-center-bridging remote-details interface xe4/3
PFC Remote details
interface : xe4/3
State Willing Cap Priorities
================================================================================
On On 4 0 1 2