show route-map
Use this command to display route-map information.
Command Syntax
show route-map (|WORD)
Parameters
WORD
Route-map name (maximum size 63 characters)
Command Mode
Exec mode and Privileged Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
The following is a sample output of the show route-map command.
#show route-map
route-map myRM, permit, sequence 1
Match clauses:
metric 200
Set clauses:
metric 60
#
Table 2-4 explains the output fields.
Table 2-4: show route-map details
Field | Description |
|---|
route-map | Name of a route map. |
permit | Routes that match the match clauses are redistributed according to the conditions defined by the set clauses. |
sequence | Position of this route map in sequence of route-maps with the same name. |
Match clauses | Routes that match the conditions defined by the match clause are redistributed according to the conditions defined by the set clauses. |
Set clauses | Routes that pass the match clause are redistributed according to the conditions defined by the set clauses. |
Last modified date: 07-13-2023