show cpu-queue details
Use this command to display details about CPU queue for QoS.
Command Syntax
show cpu-queue details
Parameters
None
Command Mode
Exec mode
Applicability
This command was introduced before OcNOS version 1.3.8
Example
#show cpu-queue details
* - Can not configure the parameter
Cpu queue Rate In PPS Lossy Status Monitor Status
Name Configured Default Configured Default Configured Default
========= ========== ======= ========== ========== ========== ===========
sflow 10000 32000 - *lossy no-monitor monitor
bgp - 1500 - lossless - monitor
vrrp - 500 - lossless - monitor
ldp-rsvp - 500 - lossless - monitor
rip - 500 - lossless - monitor
ospf 0 2000 lossy lossless monitor monitor
dhcp - 100 - lossy - no-monitor
nd 200 6000 lossless lossless monitor monitor
mpls - 500 - lossy - no-monitor
pim - 4000 - *lossy - *no-monitor
arp 100 6000 lossy lossless no-monitor monitor
igmp - 4000 - *lossy - *no-monitor
bpdu 1000 10000 - lossless monitor monitor
ccm - 500 - lossy - no-monitor
bfd - 2000 - lossy - no-monitor
ptp - 1000 - lossy - no-monitor
isis - 500 - lossless - monitor
trill-isis - 1000 - lossless - monitor
acl - 200 - *lossy - *no-monitor
vxlan - 500 - lossy - monitor
Table 1-3 explains the output fields.
Table 1-3: show CPU Queue fields
Entry | Description |
|---|
CPU queue name | Name of the CPU queue |
Rate In PPS | At which packets are successfully delivered |
Lossy Status | Status of the network lossy or lossless |
Monitor Status | Status of the network monitor |
Last modified date: 07-14-2023