OcNOS-RON-6.3.1 : Multi-Protocol Label Switching Guide : Multi-Protocol Label Switching Command Reference : MPLS Commands : show mpls l2-circuit
show mpls l2-circuit
Use this command to view MPLS-TP L2 circuit parameters.
Command Syntax
show mpls l2-circuit (detail|)
show mpls l2-circuit NAME (detail|)
Parameters
detail
Show detailed information
NAME
The name of the virtual circuit
Command Mode
Exec mode and Privileged Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#show mpls l2-circuit detail
MPLS Layer-2 Virtual Circuit: vc1, id: 1 PW-INDEX: 1 service-tpid: 8100
 
Endpoint: 1.1.1.1
Control Word: 0
MPLS Layer-2 Virtual Circuit Group: none
Bound to interface: xe41
Virtual Circuit Type: Ethernet VLAN
Virtual Circuit is configured as Primary
Virtual Circuit is configured as Active
Virtual Circuit is active
Service-template : C1
Match criteria : 10-14, 16-20
 
 
Table 14 explains the show command output fields.
 
Table 14: show mpls l2-circuit output field
Field
Description
MPLS Layer-2 Virtual Circuit
The MPLS virtual circuit on the egress PE router or switch and the specified neighbor, testing the integrity of the Layer 2 circuit between the ingress and egress PE routers or switches.
Endpoint
Endpoint address.
Control Word
Number of control words.
MPLS Layer-2 Virtual Circuit Group
The MPLS virtual circuit group on the egress PE router or switch and the specified neighbor, testing the integrity of the Layer 2 circuit between the ingress and egress PE routers or switches.
 
Bound to interface
A bound service is the server in a client-server interface.
Virtual Circuit Type
Type of virtual circuit in the interface.
Service-template
Service Templates provides a powerful mechanism to configure advanced service-related options.
Match criteria
The match criteria under which redistribution is allowed for the current route-map.
Last modified date: 07-13-2023