show mpls mapped-routes
Use this command to view MPLS mapped routes.
Use the no parameter with this command to reset this configuration.
Command Syntax
show mpls mapped-routes
Parameters
None
Command Mode
Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#show mpls mapped-routes
Mapped-route IPv4 FEC MPLS-TP Tunnel
14.1.2.3/32 N/A NH4
Table 16 explains the show command output fields.
Table 16: show mpls mapped-routes output field
Field | Description |
|---|
Mapped-route | Map the route of the interface. |
IPv4 | IPv4 address of the neighbor interface. |
FEC | Displays the Forward Equivalency Class (FEC) for this entry. |
MPLS-TP Tunnel | MPLS-TP tunnel can be provisioned between two arbitrary nodes in an MPLS-TP enabled network. |
Last modified date: 07-13-2023