show mpls qos-resource
Use this command to display detailed QoS resource information.
Command Syntax
show mpls qos-resource IFNAME
Parameters
IFNAME
Display the interface name for a QoS resource
Command Mode
Exec mode and Privileged Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#show mpls qos-resource eth1
<**********************************************>
QOS RESERVED TABLE
<**********************************************>
HOLD PRIORITY : 0
HOLD PRIORITY : 1
HOLD PRIORITY : 2
HOLD PRIORITY : 3
HOLD PRIORITY : 4
HOLD PRIORITY : 5
HOLD PRIORITY : 6
HOLD PRIORITY : 7
<**********************************************>
QOS AWAITING TABLE (static resources)
<**********************************************>
HOLD PRIORITY : 0
HOLD PRIORITY : 1
HOLD PRIORITY : 2
HOLD PRIORITY : 3
HOLD PRIORITY : 4
HOLD PRIORITY : 5
HOLD PRIORITY : 6
HOLD PRIORITY : 7
TSUP-173>
Table 18 explains the show command output fields.
Table 18: show mpls qos-resource output fields
Field | Description |
|---|
QOS RESERVED TABLE | FTM/ILM entries for which QOS is reserved. |
HOLD PRIORITY | Determines the degree to which an LSP holds onto its session reservation after the LSP has been set up successfully |
QOS AWAITING TABLE (static resources) | FTN/ILM entries for which QOS reservation is pending. |
Last modified date: 07-13-2023