OcNOS-RON-6.3.1 : Multi-Protocol Label Switching Guide : Multi-Protocol Label Switching Command Reference : MPLS Commands : show mpls vc-table
show mpls vc-table
Use this command view configured virtual circuit (VC) components
Command Syntax
show mpls vc-table
Parameters
None
Command Mode
Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#show mpls vc-table
 
VC-ID Vlan-ID Inner-Vlan-ID Access-Intf Network-Intf Out Label Tunnel-Label Nexthop Status
500 N/A N/A eth2 eth1 544 57 N/A Active
#
 
Table 19 explains the show command output fields.
 
Table 19: show mpls vc-table output fields
Field
Description
VC-ID
The virtual circuit ID for the Provider Edge (PE) MPLS.
Vlan-ID
Virtual LAN (VLAN) ID number.
Inner-Vlan-ID
Inner Virtual LAN (VLAN) ID number.
Access-Intf
The Interface Access page provides a method with which to control access to specific areas of the interface.
Network-Intf
A networking interface allows a computer or mobile device to connect to a local area network (LAN) using Ethernet as the transmission mechanism.
Out Label
Label received from downstream neighbor for route.
Tunnel-Label
Used to provide reachability between PE devices.
Nexthop Status
Displays the network status of the next hop.
 
Last modified date: 07-13-2023