OcNOS-RON-6.3.1 : Layer 3 Guide : Open Shortest Path First Command Reference : OSPFv2 Commands : show ip ospf igp-shortcut-lsp
show ip ospf igp-shortcut-lsp
Use this command to show the IGP shortcut LSP used by OSPF.
Command Syntax
show ip ospf igp-shortcut-lsp
Parameters
None
Command Mode
Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#show ip ospf igp-shortcut-lsp
Tunnel-endpoint Tunnel-id Tunnel-metric
8.8.8.8 101 2 active
Table 1-15 explains the fields in the output.
 
Table 1-15: show ip ospf igp-shortcut-lsp output details
Field
Description
Tunnel-endpoint
Tunnel endpoint address of ospf.
Tunnel-id
Tunnel address (destination port) for the session.
Tunnel-metric
Number of tunnel-metric.
active/inactive
Whether the tunnel is active or inactive.
 
Last modified date: 07-13-2023