show ip protocols
Use this command to display OSPF process parameters and statistics.
Command Syntax
show ip protocols
show ip protocols ospf
Parameters
None
Command Mode
Privileged Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
This is an example of the output from the show ip protocols command:
#show ip protocols
Routing Protocol is "ospf 200"
Invalid after 0 seconds, hold down 0, flushed after 0
Outgoing update filter list for all interfaces is
Redistributed kernel filtered by filter1
Incoming update filter list for all interfaces is
Redistributing: kernel
Routing for Networks:
192.30.30.0/24
192.40.40.0/24
Routing Information Sources:
GatewayDistanceLast Update
Distance: (default is 110)
AddressMaskDistance List
Table 1-24 explains the fields for each ip protocol entry.
Table 1-24: show ip protocols output details
Field | Description |
|---|
Routing Protocol is "ospf 200" | Specifies the routing protocol used. |
Invalid after 0 seconds | Specifies the value of the invalid parameter. |
Hold down 0 | Specifies the current value of the hold-down parameter. |
Flushed after 0 | Specifies the time in seconds after which the individual routing information will be thrown (flushed) out. |
Outgoing update | Specifies whether the outgoing filtering list has been set. |
Incoming update | Specifies whether the incoming filtering list has been set. |
Redistributing | Lists the protocol that is being redistributed. |
Routing for Networks | Specifies the networks for which the routing process is currently injecting routes. |
Routing Information Sources | Lists all the routing sources the IP Infusion software is using to build its routing table. |
Last modified date: 07-13-2023