no secondary record
This command is used to disable recording of the route taken by path and resv messages and confirms the establishment of reservations and to identify errors. Routes are recorded by means of the route record object (RRO) in an RSVP message.
Use the
secondary record command to revert to the default settings.
Command Syntax
no secondary record
Parameters
None
Default
By default, routes are recorded
Command Mode
Trunk mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#rsvp-trunk mytrunk
(config-trunk)#no secondary record
Last modified date: 07-13-2023