secondary record
This command is used to enable recording of the route taken by path and resv messages to confirm the establishment of reservations and to identify errors. Routes are recorded by means of the route record object (RRO) in RSVP messages.
Use the
no secondary record command to revert to the default settings.
Command Syntax
secondary record
Parameters
None
Default
By default, routes are recorded
Command Mode
Trunk mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#rsvp-trunk mytrunk
(config-trunk)#secondary record
Last modified date: 07-13-2023