OcNOS-RON-6.3.1 : Multi-Protocol Label Switching Guide : RSVP-TE Command Reference : Show Commands : show rsvp nexthop-cache
show rsvp nexthop-cache
Use this command to display the current nexthops being cached by RSVP.
Command Syntax
show rsvp nexthop-cache
Parameters
None
Command Mode
Exec and Privileged Exec modes
Applicability
This command was introduced before OcNOS version 1.3.
Example
#show rsvp nexthop-cache
Prefix Nexthop Outgoing Intf Valid For Num Sessions
10.10.20.80/32 0.0.0.0 eth1 12 seconds 1
10.10.23.60/32 0.0.0.0 eth0 17 seconds 1
#
 
Table 2-8 explains the show command output fields.
 
Table 2-8: show rsvp nexthop-cache output field
Field
Description
Prefix
It is an ordered list and entries are evaluated in order of increasing sequence number.
Nexthop
IP address of the next hop.
Outgoing Intf
Short name of the physical interface through which traffic goes to the protected link.
Valid For
Frequency at which RSVP hellos are sent next hop on this interface (in seconds).
Num Sessions
Number of session in the interface.
 
Last modified date: 07-13-2023