show interface transceiver details
Use this command to display details of transceivers and threshold violations.
Command Syntax
show interface (IFNAME|) transceiver (detail|threshold violation|)
Parameters
IFNAME
Interface name. If not specified, this command displays details of all connected transceivers.
detail
Transceiver information such as voltage, temperature, power, and current.
threshold violation
Transceiver threshold violations.
Default
None
Command Mode
Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#show interface transceiver detail
PORT Temp High Alarm High Warn Low Warn Low Alarm
(Celsius) (Celsius) (Celsius) (Celsius) (Celsius)
--------------------------------------------------------
5 30.060 95 90 -20 -25
6 30.463 95 90 -20 -25
52 34.486 75 70 0 -5
53 30.764 75 70 0 -5
Voltage High Alarm High Warn Low Warn Low Alarm
(Volts) (Volts) (Volts) (Volts) (Volts)
---------------------------------------------------------
5 3.339 3.900 3.700 2.900 2.700
6 3.365 3.900 3.700 2.900 2.700
52 3.360 3.630 3.465 3.135 2.970
53 3.353 3.630 3.465 3.135 2.970
Current High Alarm High Warn Low Warn Low Alarm
(mA) (mA) (mA) (mA) (mA)
---------------------------------------------------------
5 6.468 17.000 14.000 2.000 0.034
6 7.014 17.000 14.000 2.000 0.034
52 7.250 10.000 9.500 1.000 0.500
53 7.284 10.000 9.500 1.000 0.500
RxPower High Alarm High Warn Low Warn Low Alarm
(dBm) (dBm) (dBm) (dBm) (dBm)
---------------------------------------------------------
5 0.332 1.259 0.794 0.016 0.010
6 0.321 1.259 0.794 0.016 0.010
52 0.727 2.188 1.738 0.112 0.000
53 0.352 2.188 1.738 0.112 0.000
TxPower High Alarm High Warn Low Warn Low Alarm
(mW) (mW) (mW) (mW) (mW)
---------------------------------------------------------
5 0.342 0.631 0.631 0.079 0.067
6 0.342 0.631 0.631 0.079 0.067
Table 26-76 explains the output fields.
Table 26-76: show interface transceiver details output
Field | Description |
|---|
Port | The number of the transceiver port. |
Temp | Temperature in degrees Celsius of the transceiver. |
Voltage | Voltage in Volts on the transceiver. |
Current | Current in Milliamperes used by the transceiver. |
Rx Power | Power received in Decibel-milliwatts (dBm) by the transceiver. |
Tx Power | Power being transmitted in milliWatts by the transceiver. |
High Alarm | The level that is needed to be reached to trigger a high alarm. |
High Warn | The level that is needed to be reached to trigger a high warning. |
Low Warn | The level that is needed to be reached to trigger a low warning. |
Low Alarm | The level that is needed to be reached to trigger a low alarm. |
Last modified date: 07-14-2023