OcNOS-RON : Layer 3 Guide : Intermediate System to Intermediate System Command Reference : IS-IS Show Commands : show ip protocols
show ip protocols
Use this command to display IP process parameters and statistics.
Command Syntax
show ip protocols
show ip protocols isis
Parameters
None
Command Mode
Exec mode, Privileged exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#show ip protocols
Routing Protocol is "isis 1 "
Redistributing:
Area Address(es): 52
Distance : (default is 115)
#
Table 3-79 explains the output fields.
 
Table 3-79: show ip protocols output
Field
Description
Routing Protocol
“isis” and the name that identifies the IS-IS area.
Redistributing
Protocols being redistributed (such as RIP, OSPF, or BGP), including metric, metric type (internal or external), and route map.
redistribute isis
Whether redistributing IS-IS level-1 into level-2 and vice versa.
Area Address
Network address of the areas into which the routing process is injecting routes.
Distance: (default is 115)
Administrative distance.
Last modified date: 08/28/2023