lldp tlv-select basic-mgmt
Use this command to select basic management TLVs to be include in the LLDP frames.
Use the no parameter to disable basic management TLVs.
Command Syntax
lldp tlv-select basic-mgmt (management-address|port-description|system-capabilities|system-description|system-name)
no lldp tlv-select basic-mgmt (management-address|port-description|system-capabilities|system-description|system-name)
Parameters
management-address
Management address specific TLV
port-description
Port description specific TLV
system-capabilities
System capabilities specific TLV
system-description
System Description specific TLV
system-name
System name specific TLV
Default Value
None
Command Mode
Configuration mode
Applicability
This command was introduced in OcNOS-SP version 3.0.
Examples
#configure terminal
(config)#lldp tlv-select basic-mgmt system-name
Last modified date: 07/13/2023