Link Layer Discovery Protocol v2 Commands

OcNOS-RON : Layer 2 Guide : Layer 2 Command Reference : Link Layer Discovery Protocol v2 Commands

Link Layer Discovery Protocol v2 Commands

The commands in this chapter support:

• Link Layer Discovery Protocol (LLDP) version 2 as described in IEEE 802.1AB 2009

• LLDP-MED protocol extension as per ANSI/TIA-1057 April 2006.

Note: To enable LLDPv2, LLDP (previous version) should be disabled or vice versa.

• clear lldp counters

• lldp tlv basic-mgmt

• lldp tlv med

• lldp tlv ieee-8021-org-specific

• lldp tlv ieee-8023-org-specific

• lldp tlv-select basic-mgmt

• lldp tlv-select ieee-8021-org-specific

• lldp tlv-select ieee-8023-org-specific

• set lldp agt-circuit-id

• set lldp chassis-id-tlv

• set lldp chassis locally-assigned

• set lldp disable

• set lldp enable

• set lldp locally-assigned

• set lldp management-address-tlv

• set lldp med-devtype

• set lldp msg-tx-hold

• set lldp port-id-tlv

• set lldp timer

• set lldp too-many-neighbors

• set lldp tx-fast-init

• set lldp tx-max-credit

• show debugging lldp

• show lldp neighbors

• show lldp interface

• snmp restart lldp

Last modified date: 07/13/2023