lldp tlv-select ieee-8021-org-specific
Use this command to select ieee-8021-org-specific TLVs to include in the LLDP frames.
Use the no parameter to disable ieee-8021-org-specific TLVs.
Command Syntax
lldp tlv-select ieee-8021-org-specific (link-agg|mgmt-vid|port-ptcl-vlanid|port-vlanid|ptcl-identity|vid-digest|vlan-name)
no lldp tlv-select ieee-8021-org-specific {port-vlanid| port-ptcl-vlanid| vlan-name|ptcl-identity| vid-digest|mgmt-vid|link-agg}
Parameters
link-agg
Link-aggregation TLV
mgmt-vid
Management VLAN identifier TLV
port-ptcl-vlanid
Port protocol VLAN identifier TLV
port-vlanid
Port VLAN identifier TLV
ptcl-identity
Protocol-identifier TLV
vid-digest
VLAN identifier digest TLV
vlan-name
VLAN name TLV
Default Value
None
Command Mode
Configuration mode
Applicability
This command was introduced in OcNOS-SP version 3.0.
Examples
#configure terminal
(config)#lldp tlv-select ieee-8021-org-specific port-vlanid
Last modified date: 07/13/2023