OcNOS-RON : Layer 2 Guide : Layer 2 Command Reference : Link Layer Discovery Protocol v2 Commands : set lldp agt-circuit-id
set lldp agt-circuit-id
Use this command to configure LLDP agt-circuit-id.
Command Syntax
set lldp agt-circuit-id VALUE
Parameters
VALUE
Specify LLDP global agt-circuit ID.
Command Mode
Interface mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
(config)#interface eth0
(config-if)#set lldp agt-circuit-id sample
 
Last modified date: 07/13/2023