set lldp chassis locally-assigned

OcNOS-RON : Layer 2 Guide : Layer 2 Command Reference : Link Layer Discovery Protocol v2 Commands : set lldp chassis locally-assigned

Use this command to set the locally assigned chassis name for the LLDP interface.

Command Syntax

set lldp chassis locally-assigned NAME

Parameters

NAME

Name assigned to the chassis.

Command Mode

Configure mode

Applicability

This command was introduced before OcNOS version 1.3.

Examples

#configure terminal

(config)#set lldp chassis locally-assigned box1

Last modified date: 07/13/2023