OcNOS-RON : Layer 2 Guide : Layer 2 Command Reference : Link Layer Discovery Protocol v2 Commands : set lldp locally-assigned
set lldp locally-assigned
Use this command to set the locally assigned name for LLDP interface.
Use no form of this command to remove the locally assigned name for LLDP interface.
Command Syntax
set lldp locally-assigned NAME
no set lldp locally-assigned NAME
Parameters
NAME
Name assigned to the port.
Command Mode
Interface Mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#interface eth0
(config-if)#set lldp locally-assigned port1
(config-if)#no set lldp locally-assigned
 
 
 
Last modified date: 07/13/2023