OcNOS-RON : Layer 2 Guide : Layer 2 Command Reference : Link Layer Discovery Protocol v2 Commands : show debugging lldp
show debugging lldp
Use this command to display LLDP debugging information.
Command Syntax
show debugging lldp
Parameters
None
Command Mode
Exec mode and Privileged Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
The following sample output displays information about an LLDP debugging.
#show debugging lldp
LLDP debugging status:
LLDP message debugging is on
 
Last modified date: 07/13/2023