OcNOS-RON : Layer 2 Guide : Layer 2 Command Reference : Multi-Chassis Link Aggregation Commands : show mlag detail
show mlag detail
Use this command to display details about MC-LAG configuration and status.
Command Syntax
show mlag <1-255> detail
Parameters
<1-255>
MC-LAG group number
Command Mode
Privileged Exec mode
Applicability
This command was introduced before OcNOS version 1.3 and updated for static channel groups in OcNOS version 1.3.6.
Examples
#sh mlag 1 detail
 
MLAG-17
Mapped Aggregator : po1
Admin Key : 32769
Oper Key: 16385
Physical properties Digest : dd 9c f 76 dd b6 5f 2f eb a1 d3 bb 8d 96 fc 82
 
Neigh Admin Key: 16385
Neigh Physical Digest: dd 9c f 76 dd b6 5f 2f eb a1 d3 bb 8d 96 fc 82
Info RCV State : Current
Info Periodic Time State : Standby
Mlag Sync : IN_SYNC
Mode : Active
 
Table 6-14 Shows the output details.
Table 6-14: Show mlag output details
Entry
Description
Mapped Aggregator
Map the output of the aggregator in the interface which is active transformation.
Admin Key
Administrative key: automatically configured value on each port configured to use MC-LAG.
Oper Key
MLAG operator key on partner: automatically configured value on each port configured to use MC-LAG.
Physical properties Digest
Physical properties of the digest.
Neigh Admin Key
Neigh administrative key: automatically configured value on each port configured to use MC-LAG.
Neigh Physical Digest
Neighbor physical properties of the digest.
Info RCV State
Details of the RCV.
Info Periodic Time State
A simple state space formulation of a general digital periodic time series.
Mlag Sync
MAC address synchronization: enables a MC-LAG partner to forward Layer 3 packets arriving on this interfaces with either its own MAC address or its partner’s.
 
 
Last modified date: 07/13/2023