OcNOS-RON : Layer 2 Guide : Layer 2 Command Reference : VLAN and Private VLAN Commands : show dtag vlan
show dtag vlan
Use this command to display information about VLAN double tagging.
Command Syntax
show dtag vlan DTAG_VLAN_ID
Parameters
DTAG-VLAN-IDs
Outer-VLAN identifier and inner-VLAN identifier in the format 100.200, where 100 is the outer tag and 200 is the inner tag
Command Mode
Exec mode and Privileged Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#show dtag vlan 2000.3001
Table 7-16 explains the output.
Table 7-16: show dtag vlan output
Field
Description
Bridge
Bridge number
VLAN ID
VLAN identifier
Name
Double tag-VLAN identifers
State
VLAN state: ACTIVE, SUSPEND, or INVALID
H/W Status
Hardware status: UP or DOWN
Member ports
Interfaces that are part of the VLAN and whether untagged (u) or tagged (t)
Last modified date: 07/13/2023