show forwarding profile limit
Use this command to show all the forwarding table sizes.
Note: The use of k for “kilo” (as in 1k) does not equal 1,000. In all cases, k equals 2 ^10: 1,024.
Command Syntax
show forwarding profile limit
Parameters
None
Default
None
Command Mode
Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#show forwarding profile limit
Configured profile : custom-profile
Forwarding profile : custom-profile(Active in hardware)
------------------------------------------------------------------------
| Forwarding Profile Table Size |
|------------------------------------------------------------------------|
|Profile Name |MAC |Host-Table |Prefix- |Vlan- |Egress- |
| |ADDR |Table(UC) |Table(UC) |xlate- |Vlan-xlate |
| |Table |IPV4 |IPv6 |IPV4 |IPV6 |Table |Table |
------------------------------------------------------------------------
l2-profile-one 96k 0k 0k 8k 4k 0k 0k
l2-profile-two 64k 8k 4k 8k 4k 8k 8k
l2-profile-three 32k 16k 8k 8k 4k 16k 16k
l3-profile 4k 92k 46k 8k 4k 0k 0k
custom-profile 576k 60k 30k 8k 4k 0k 0k#
Table 33-89 explains the show command output fields.
Table 33-89: show forwarding profile limit output
Field | Description |
|---|
Profile Name | Names of the forwarding profiles |
MAC ADDR Table | MAC address table sizes |
Host-Table (UC) IPv4 | IPv4 unicast host table sizes |
Host-Table (UC) IPv6 | IPv6 unicast host table sizes |
Prefix-Table (UC) IPv4 | IPv4 unicast prefix table sizes |
Prefix-Table (UC) IPv6 | IPv6 unicast prefix table sizes |
Vlan-xlate-Table | Number of VLAN translate banks |
Egress-Vlan-xlate-Table | Number of egress VLAN translate banks |
Last modified date: 08/28/2023