show tacacs-server
Use this command to display the TACACS+ server configuration.
Command Syntax
show tacacs-server (|vrf (management|all))((WORD)|(groups (GROUP|)|)|(sorted)
Parameters
WORD
DNS host name or IP address
groups
TACACS+ server group
GROUP
Group name; if this parameter is not specified, display all groups
sorted
Sort by TACACS+ server name
vrf
management or all VRFs
Command Mode
Executive mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#show tacacs-server
total number of servers:1
Tacacs+ Server : 192.168.10.215/49(*)
Sequence Number : 1
Failed Auth Attempts : 0
Success Auth Attempts : 14
Failed Connect Attempts : 0
Last Successful authentication: 2017 December 18, 12:27:13
(*) indicates last active.
Table 14-22 explains the output fields.
Table 14-22: show tacacs-server output fields
Field | Description |
|---|
Sequence Number | Sequence number of user authentication attempt with the TACACS+ server. |
Failed Auth Attempts | Number of times user authentication failed with the TACACS+ server. Increments for server key mismatches and password mismatches or wrong password for the user. |
Success Auth Attempts | Number of times user authenticated with TACACS+ server. Increments for each successful login. |
Failed Connect Attempts | Number of failed TCP socket connections to the TACACS+ server. Increments for server connection failure cases such as server not-reachable, server port mismatches. |
Last Successful authentication | Timestamp when user successfully authenticated with the TACACS+ server. |
Last modified date: 08/28/2023