OcNOS-SP : Layer 3 Guide : Bidirectional Forwarding Detection Command Reference : Bidirectional Forwarding Commands : show bfd
show bfd
Use this command to display information about the BFD process.
Command Syntax
show bfd
Parameters
None
Command Mode
Exec mode and Privileged Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
The example below displays the command syntax and sample output from the command.
#show bfd
BFD ID: 00 Start Time:Fri May 1 09:55:06 2009
Number of Sessions: 1
Slow Timer: 1000 Image type: MONOLITHIC
Echo Mode: Disabled Next Session Discriminator: 2
#
Table 1-85 explains the output fields.
 
Table 1-85: show BFD fields
Entry
Description
BFD ID
ID number of the BFD session.
Start Time
The date and time when the BFD session was started
BFD Admin State
State of the BFD session:
 
Initializing: session is initializing
Up: session is up.
Down: session is down
Number of Sessions
Number of BFD sessions running on the device.
Slow Timer
Required minimum transmission time for the BFD session.
Image Type
Distributed or Monolithic.
Echo Mode
Either enabled or disabled.
Next Session Discriminator
An opaque discriminator value that identifies each session on the device that is used to demultiplex multiple BFD sessions between the same pair of devices.
Last modified date: 08/28/2023