show ethernet cfm errors
Use this command to verify the defects present in a MEP.
Command Syntax
show ethernet cfm errors (domain DOMAIN_NAME)
Parameters
DOMAIN_NAME
Enter the name of the domain. Name must be of 5 characters if type is character-string otherwise no_name if domain-type is no-name1
Command Mode
Exec mode and Privileged Exec mode
Applicability
This command was introduced in OcNOS version 3.0.
Example
#show ethernet cfm errors domain 12345
Domain Name Level Vlan MEPID Defects
--------------------------------------------------------
12345 7 10 100 .....
Table 1-4 explains the output fields
Table 1-4: show ethernet cfm errors
Field | Description |
|---|
Domain Name | Maintenance Domain name |
Level | MD Level |
Vlan | Vlan identifier |
MEPID | Maintenance End Point identifier |
Defects | Defects in current MEP |
Last modified date: 07/11/2023