show ethernet cfm frame-lm session
Use this command to display information about the frame loss measurement session.
Command Syntax
show ethernet cfm frame-lm session
Parameters
None
Command Mode
Exec mode and Privileged Exec mode
Applicability
This command was introduced in OcNOS version 3.0.
Example
#show ethernet cfm frame-lm session
MEPID Status StartTime Lm-profile Mac-address Repetition Period(sec)
--------------------------------------------------------------------------------------
201 Active 2018/10/01 00:18:46 slm 0018.236e.5eb5 60
Table 1-5 explains the output fields.
Table 1-5: show ethernet cfm frame-lm session
Field | Description |
|---|
MEPID | Maintenance End Point identifier |
Status | Inactive: if loss measurement is not in progress Active: otherwise |
StartTime | When loss measurement started |
Lm-profile | Loss measurement profile name |
Mac-address | MAC address |
Repetition Period | Repetition time between measurement intervals in seconds |
Last modified date: 07/11/2023