show g8031 eps-id
Use this command to display the status of a particular g8031 protection group.
Command Syntax
show g8031 eps-id <1-32> bridge <1-32>
Parameters
<1-32>
Protection group id.
<1-32>
Bridge name.
Command Mode
Exec mode.
Applicability
This command was introduced before OcNOS version 5.0.
Examples
# show g8031 eps-id 10 bridge 1
=================================== Bridge:1 Eps-id:10 ===================================
Bridge Direction Revertive PVID Total-Vlans Working-Path Protection-Path
----------------------------------------------------------------------------------
1+1 Bi Yes 10 7 xe7 xe8
Active-Path Local-Freeze -Attached Request-Signal Current-State
-----------------------------------------------------------------------------------------
Working No Yes Null Signal Fail for Protection
dFOP State: Not in defect mode
APS Statistics
---------------
L-APS Rx count: 0
L-APS Tx count: 0
Table 2-13 explains the output fields:
Table 2-13: show g8031 eps-id output fields
Field | Description |
|---|
Bridge | Bridge id |
Eps-id | Protection group id |
Bridge | Architecture type - 1+1 or 1:1 |
Direction | Switching type - Bidirectional or Unidirectional |
Revertive | Switchover type revertive |
PVID | Primary vlan |
Total-vlans | Total number of g8031 vlans |
Working-path | Working port name |
Protection-path | Protection port name |
Active-path | Current active path |
Local-freeze | Protection group locally freezed or not |
-attached | Protection group attached to Meps or not |
Request Signal | Null or Normal Signal |
Current state | Protection group State as per State Machine |
dFop State | Defect type |
L-APS Rx count | Number of received g8031 L-APS control pkts |
L-APS Tx count | Number of transmitted g8031 L-APS control pkts |
Last modified date: 07/11/2023