show spanning-tree mst
Use this command to display the filtering database values. This command displays the number of instances created, and VLANs associated with it.
Command Syntax
show spanning-tree mst
show spanning-tree mst config
show spanning-tree mst detail
show spanning-tree mst detail interface IFNAME
show spanning-tree mst instance (<1-63>) interface IFNAME
show spanning-tree mst instance (<1-63> | te-msti)
show spanning-tree mst interface IFNAME
Parameters
config
Display configuration information.
detail
Display detailed information.
interface
Display interface information.
instance
Display instance information.
<1-63>
Specify the instance identifier.
te-msti
Traffic Engineering MSTI instance.
Command Mode
Exec mode and Privileged Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#show spanning-tree mst
% 1: Bridge up - Spanning Tree Enabled
% 1: CIST Root Path Cost 0 - CIST Root Port 0 - CIST Bridge
Priority 32768
% 1: Forward Delay 15 - Hello Time 2 - Max Age 20 - Max-hops 20
% 1: CIST Root Id 80000002b328530a
% 1: CIST Reg Root Id 80000002b328530a
% 1: CIST Bridge Id 80000002b328530a
% 1: 2 topology change(s) - last topology change Wed Nov 19 22:43:21 2008
% 1: portfast bpdu-filter disabled
% 1: portfast bpdu-guard disabled
% 1: portfast errdisable timeout disabled
% 1: portfast errdisable timeout interval 300 sec%
% Instance VLAN
% 0: 1
% 2: 3-4
Table 4-13 Explains the show command output fields.
Table 4-13: show spanning-tree mst output fields
Field | Description |
|---|
Bridge up | A network bridge is networking process that creates a single aggregate network from multiple communication networks or network segments. |
CIST Root Path Cost | Calculated cost to reach the regional root bridge from the bridge where the command is entered. |
CIST Root Port | Interface that is the current elected CIST root port for this bridge. |
CIST Bridge | A CIST bridge is networking process that creates a single aggregate network from multiple communication networks. |
Priority | Specify the port priority. |
Forward Delay | Configured time an STP bridge port remains in the listening and learning states before transitioning to the forwarding state. |
Hello Time | Configured number of seconds between transmissions of configuration BPDUs. |
Max Age | Maximum age of received protocol BPDUs. |
Max-hops | Configured maximum number of hops a BPDU can be forwarded in the MSTP region. |
Last modified date: 07/06/2023