show monitor session
Use this command to display the configuration details of one or more monitor sessions.
Command Syntax
show monitor session (<1-18>|all|(range RANGE)) (brief|)
Parameters
<1-18>
Session number
all
All sessions
RANGE
Session number range (n1-n2)
brief
Brief information
Command Mode
Exec mode or Privileged Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#show monitor session 1
session 1
---------------
type : local
state : down (Session admin shut)
source intf :
tx : xe1 xe3 xe4
rx : xe2 xe3 xe4
both : xe3 xe4
source VLANs :
rx : 2,5-10,15,18-20
destination ports : xe5
filter count :
Legend: f = forwarding enabled, l = learning enabled
#
Table 7-20 Explains the show command output fields
Table 7-20: Show monitor session output fields
Field | Description |
|---|
Type | Type of monitor session. |
State | State of the security flow filter. |
Rx | Incoming flow (source and destination IP addresses). |
Tx | Reverse flow (source and destination IP addresses). |
Both | Incoming and reverse flow (source and destination IP address) |
Destination Port | Name of the destination port to be matched. |
Source intf | Number of maximum intf central source session. |
Source VLANs | Number of maximum VLANs central source session. |
Filter count | Used to count number of lines in a file or table. |
Last modified date: 07/06/2023