Topology
Figure 3-3 shows the configuration required to enable OSPF segment routing at a global level and configure a prefix SID at the interface level.
You can configure a prefix SID on any router directly attached to that network prefix. In most cases configuring only one router is sufficient. If a prefix SID with the same prefix is configured on different routers, IP Infusion Inc. recommends that all SID values be the same.
Figure 3-3: OSPF Intra-Area Segment Routing Topology
Note: You must ensure that prefix SIDs are globally unique. Do not configure the same SID on different prefixes.
Last modified date: 06/27/2023