evpn vxlan multihoming enable
Use this command to enable evpn vxlan multi-homing
Use the no form of this command to disable evpn vxlan multi-homing.
Note: You must restart the device after giving this command. If there are devices in the topology which have multi-homed CEs, then devices which do not have multi-homed CEs should also enable multihoming so that they can load share traffic to the multi-homed CEs.
Note: Before enabling multi-homing, configure the hardware-profiles:
Command Syntax
evpn vxlan multihoming enable
no evpn vxlan multihoming enable
Parameters
None
Default
By default, multi-homing is disabled.
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3 and changed in OcNOS version 4.0.
Example
#configure terminal
#(config)#evpn vxlan multihoming enable
#(config)#exit
Last modified date: 08/29/2023