show nvo vxlan
Use this command to display VXLAN information.
Command Syntax
show nvo vxlan (vnid <1-16777215>|)
Parameters
<1-16777215>
VXLAN network identifier
Command Mode
Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#sh nvo vxlan
VXLAN Information
=================
Codes: NW - Network Port
AC - Access Port
(u) - Untagged
VNID Vni-name Type Interface ESI Vlan DF-Status Src-addr Dst-addr
___________________________________________________________________________________________________________________
10 ---- NW ---- ---- ---- ---- 1.1.1.1 3.3.3.3
10 ---- NW ---- ---- ---- ---- 1.1.1.1 2.2.2.2
10 ---- AC ce21/1 00:00:11:22:33:44:55:66:77:88 2 DF ---- ----
20 ---- NW ---- ---- ---- ---- 1.1.1.1 3.3.3.3
20 ---- NW ---- ---- ---- ---- 1.1.1.1 2.2.2.2
20 ---- AC ce21/1 00:00:11:22:33:44:55:66:77:88 3 NON-DF ---- ----
45001 ---- L3 NW ---- ---- ---- 1.1.1.1 3.3.3.3
Total number of entries are 7
Table 1-6 explains the fields in the output.
Table 1-6: VxLAN fields
Field | Description |
|---|
VNID | VXLAN network identifier. |
Type | NW - Network Port: VxLAN tunnel AC - Access Port: Host connection |
Interface | Name of the Interface. |
Vlan | VLAN identifier |
Src-addr | Source address in the interface. |
Dst-addr | Destination address in the interface. |
Total number of entries | The total number of entries listed. |
Last modified date: 08/29/2023