show nvo vxlan xconnect
Use this command to display the VPWS xconnect details of the MTU, AC-NW connections, and network status.
Command Syntax
show nvo vxlan xconnect
Parameters
None
Command Mode
Exec mode
Applicability
This command was introduced in OcNOS version 5.1.
Example
MH-VTEP3#sh nvo vxlan xconnect
EVPN Xconnect Info
========================
AC-AC: Local-Cross-connect
AC-NW: Cross-connect to Network
AC-UP: Access-port is up
AC-DN: Access-port is down
NW-UP: Network is up
NW-DN: Network is down
NW-SET: Network and AC both are up
Local Remote Connection-Details
================================ ============ ===================================================================================
VPN-ID EVI-Name MTU VPN-ID Source Destination PE-IP MTU Type NW-Status
================================ ============ ===================================================================================
92 ---- 1500 91 xe2 92 --- Single Homed Port --- 102.1.1.1 1500 AC-NW NW-SET
94 ---- 1500 93 xe2 94 --- Single Homed Port --- 102.1.1.1 1500 AC-NW NW-SET
38052 ---- 1500 38051 xe2 380 716 00:11:22:33:00:00:00:55:66:77 101.1.1.1 1500 AC-NW NW-SET
102.1.1.1 1500 ---- ----
39012 ---- 1500 39011 xe2 390 715 00:00:00:12:34:90:90:00:00:00 101.1.1.1 1500 AC-NW NW-SET
102.1.1.1 1500 ---- ----
Total number of entries are 4
Table 1-14 explains the output fields.
Table 1-14: show nvo vxlan xconnect fields
Field | Description |
|---|
Local VPN-ID | Source VPWS ID |
Local EVI-Name | EVI name of the local VPWS ID |
Local MTU | Local MTU |
Remote VPN-ID | Remote (target) VPWS ID |
Source | Source AC port |
Destination | Destination AC port: “Single Homed Port” or ESI value if it is multi-homed port |
PE-IP | IP Address of the provider edge. |
MTU | Remote MTU |
Type | Connection details of the AC port |
NW-Status | Connection details of the NW port |
Total number of entries | Total number of entries listed. |
Last modified date: 08/29/2023