show ethernet cfm dm sessions
Use this command to display information about the delay measurement session.
Command Syntax
show ethernet cfm dm sessions
Parameters
None
Command Mode
Exec mode and Privileged Exec mode
Applicability
This command was introduced in OcNOS version 3.0.
Example
#show ethernet cfm dm sessions
MEP-Id Status StartTime DM-Profile Mac-address Repetition Period(sec)
--------------------------------------------------------------------------------------
123 Active 2019/06/01 13:14:46 123 0018.236e.5eb5 60
Table 1-3 explains the output fields.
Table 1-3: show ethernet cfm dm sessions
Field | Description |
|---|
MEP-Id | Local Maintenance End Point identifier |
Status | Inactive: if delay measurement session is not started Active: if delay measurement session is started |
StartTime | Time when delay measurement session is started |
DM-Profile | delay measurement profile name |
Mac-address | MAC address |
Repetition Period | Repetition time between measurement intervals in seconds |
Last modified date: 10/20/2023