show hsl g8031 debug
Use this command to display debugging related information of a particular g8031 protection group.
Command Syntax
show hsl g8031 debug <1-32>
Parameters
<1-32>
Protection group id
Command Mode
Exec mode
Applicability
This command was introduced before OcNOS version 5.0.
Examples
# show hsl g8031 debug 10
====================================================
G8031 PG:10 Debug Details
====================================================
Mode : 1+1 Bidir (Revertive)
Working Port : 5007
Protection Port : 5008
Active Port : Working-Port
---------------------------------------------------
Ingress Group-ID : 112
Cfm-Allow entry-id : 78 [InPort:5008]
Data-Block entry-id : 79 [InPort:5008]
Egress Group-ID : 115
Split-H entry-id : 80 [SrcPort:5007 DstPort:5008]
---------------------------------------------------
Stp States
Working-Port : Forward
Protection-Port : Forward
---------------------------------------------------
Table 2-15 explains the output fields:
Table 2-15: show hsl g8031 output fields
Field | Description |
|---|
PG | Protection group id |
Mode | Configured g8031 mode on protection group |
Working-Port | Working port ifindex |
Protection port | Protection port ifindex |
Active port | Current active port |
Ingress group id | Ingress bcm field group id. Valid for 1+1 only |
Cfm-allow entry id | Cfm related bcm entry is added in Ingress bcm field group. This displays entry-id of that field entry |
Data-block entry-id | Data traffic related bcm entry is added in Ingress bcm field group. This displays entry-id of that field entry |
Egress group id | Egress bcm field group id. Valid for 1+1 only |
Split-H entry-id | Split-Horizon related entry is added in Egress field group. This displays entry-id of that field entry |
Working-Port | Stp state of working port |
Protection-port | Stp state of protection port |
Last modified date: 10/20/2023