show ldp statistics
Use this command to display LDP statistics.
Command Syntax
show ldp statistics
Parameter
None
Command Mode
Exec mode and Privileged Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
The following is a sample output from the show ldp statistics command.
#show ldp statistics
=======================================================
LSR ID = 0.0.0.0:0 : TARGETED PEER: 10.10.10.10
=======================================================
PacketType Total
Sent Received
Notification 0 0
Hello 0 0
Initialization 0 0
Keepalive 0 0
Address 0 0
Address Withdraw 0 0
Label Mapping 0 0
Label Request 0 0
Label Withdraw 0 0
Label Release 0 0
Request Abort 0 0
=======================================================
#
Table 2-46 explains the show command output fields.
Table 2-46: show ldp statistics output fields details
Field | Description |
|---|
LSR ID | Identifier of the LSR. |
Targeted Peer | Targeted LDP neighbor can improve the label convergence time compared to the convergence time with directly connected LDP peers when there are flapping links. |
Packet Type | Type of packet in the interface that has been received or transmitted to the neighbors. |
Total | Number of total packets that has been received and transmitted. |
Last modified date: 10/17/2023