OcNOS-SP : Multi-Protocol Label Switching Guide : Label Distribution Protocol Command Reference : LDP Show Commands : show mpls ldp neighbor
show mpls ldp neighbor
Use this command to display LDP neighbor information.
Command Syntax
show mpls ldp neighbor
show mpls ldp neighbor detail
Parameter
detail
Details for adjacencies.
Command Mode
Exec mode and Privileged Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#show mpls ldp neighbor detail
IP Address Interface Name Holdtime LDP ID
192.168.3.5 eth1 15 10.10.0.18:0
192.168.4.5 eth2 15 10.10.0.18:0
 
 
Table 2-52 explains the show command output fields.
 
Table 2-52: show mpls ldp neighbor output fields
Field
Description
IP Address
Address of the interface.
Interface Name
Name of the interface.
Holdtime
The amount of time this device waits between SPFs.
LDP ID
Local label space ID. The first four bytes of an LDP ID is a platform IP address called the LDP router ID. The last two bytes are called the local label space ID.
 
Last modified date: 10/17/2023